Pages

Thursday, June 20, 2013

Tutorial on how to make Fairy Wings Using Lutradur

Hello Friends,

I want to share a new way of making fairy wings for your dolls. You could also taylor this to make wings big enough for a person as well. Here is a picture of the finished wings. I have not embellished them with anything yet but I wanted to just give you an idea. You could embellish them with anything (glitter, filigrees, etc.).


Supplies
Lutradur-To order- Click Here 
There are differences in lutradur. Either lightweight or thicker. I used the lightweight because I wanted more translucent look.

dye or ink of some kind (I used dye-na-flow by Jacquard. colors were magenta and emerald green) To order click Dye Na Flow


some kind of a mister or spray bottle  ( I used 2 ranger brand mini misters for diluting the paint with water and a larger one for plain water) to order, click 


wire for wings ( the size of wire gauge depends on how big the wings will be. for smaller wings like mine which were 1 1/2 inches use anywhere from size 22g-26g or even smaller) to order wire, click to order Craft Wire

a good type of glue (I use Crafters pick: the ultimate) Click here to order The Ultimate 4 Ounces-

a heat gun (a blow dryer will not work for this) click to order a heat gun

embellishments

wing template

  • Here is my wing template I made:
Fairy wing printable and tutorial. Property of Cassie's Creative Crafts





Instructions


  • First, mix your paints with water in the spray bottles. I put two or three drops of the dye na flow into the mini mister and filled rest up with water. Then I filled a bigger spray bottle from ranger with water. Here is a picture: 
                    
    Here are the dye na flowFairy wing printable and tutorial. Property of Cassie's Creative Crafts




    here is where I mixed the dye na flow with water and the other bigger bottle is plain water.Fairy wing printable and tutorial. Property of Cassie's Creative Crafts





  • Then you need too get your lutradur. Here is the lutradur: 
    Fairy wing printable and tutorial. Property of Cassie's Creative Crafts


  • Start spraying the mixed colors of your choice onto the lutradur everywhere. sometimes I use the water bottle to thin out the color or blend them. 
Fairy wing printable and tutorial. Property of Cassie's Creative Crafts

  • Then once you have all of your colors on there and the way you like it, set it aside to dry.
  • Once the painted lutradur is dry, then you can get out your craft wire and glue and start creating your wings.
  • Ok, now tape your wing template onto you table and then place the lutradur over your wing template so that you are able to see the wing through the lutradur and position it with old clay or tiny peices of tape (make sure not to use too much tape and then have issues getting it to come off.
Start placing the wires onto the lutradur and I always do both wings together so that I can make sure they are even and I think it is quicker too.


Fairy wing printable and tutorial. Property of Cassie's Creative Crafts

Fairy wing printable and tutorial. Property of Cassie's Creative Crafts

Fairy wing printable and tutorial. Property of Cassie's Creative Crafts

*Please ignore the above watermark on my photos. This is my old blog. I made this before my blog  name changed. *

  • let the wires dry really well.
Now here is the part that you are going to use the heat gun. It is important that you use a heat gun because a hair dry doesn't get hot enough. Also, you can't skip the heat part because the dye na flow has to be heated in order for the paint not to run and become permanent. If you don't like what the heat gun does then you could place the lutradur in-between the wax paper and iron it. I like the look of the heat fun on the lutradur. I also use a heated stencil writer to make the ends of the wings look the way I want. 

  • Please be careful using the heat gun. The wires get extremely hot and you could get burned it you are not careful. I held mine with tweezers some and then I did part of it while it was laying on some paper towels.


  • This is what the lutradur does when heated. They call it lace or lacing (I believe). It is so cool and I think it is the perfect look for wings.

Fairy wing printable and tutorial. Property of Cassie's Creative CraftsFairy wing printable and tutorial. Property of Cassie's Creative Crafts

Here is the picture of what the wing looks like
Fairy wing printable and tutorial. Property of Cassie's Creative Crafts

  • Now just cut out the wings to your liking...
Fairy wing printable and tutorial. Property of Cassie's Creative Crafts

Fairy wing printable and tutorial. Property of Cassie's Creative Crafts




    *I embellished the wings with glitter (I rushed, so they aren't perfect or my best) I just did it for this tutorial, so you could get an idea of what it looks like almost finished.*





    • These wings were very small and so the 'lace' part that has holes in it would look really cool with bigger wings and with a wing template that has less wire usage.
    • You could embellish them anyway you desire. In the picture on the left, I started using 'Radiant Rain' mist  (ice) by Luminarte. click to order Radiant Rain Shimmering Mist - Ice 

    I truly hope you enjoy these wings and post some pictures of your finished work. If you have any questions let me know.

    #fairywings #faerywings #fantasy #crafts #tutorial #ooakdolls #lutradur #lutradurcrafts #fairywingtemplate

    Thank you, and always keep crafting! 


    No comments:

    Post a Comment